EPEVER UPower-Hi Hybrid Inverter (Wechselrichter / Ladegerät) ist die neue Generation von UPower Hybrid Inverter. Er unterstützt das verschiedene Energieverwaltungsmodi für das Laden von Solar-, Netz- und Generatorstrom sowie die Versorgung der Wechselstromverbraucher mit Netz- und Wechselrichterstrom. Um die Solarenergienutzung zu maximieren, können die Benutzer die Energiequellen entsprechend dem tatsächlichen Bedarf auswählen und das Versorgungsunternehmen flexibel als Ergänzung nutzen. Dieses Wechselrichter-Ladegerät kann die garantierte Stromversorgungsrate des Systems erhöhen, was für Solarenergie-, Versorgungs-/Ölgenerator-Hybridsysteme geeignet ist. Es zielt darauf ab, den Benutzern hochwertige, hochstabile und hochzuverlässige elektrische Energie zu liefern. Dank der Verbesserung von Schutzfunktionen gegen Überstrom und Verpolung unterstützt der UPower-Hi Inverter das Lithiumbatteriesystem.
Besondere Merkmale:
- Full intelligent digital energy storage equipment
- Supports the battery mode or non-battery mode
- Non-battery mode: charging with solar (Main) and utility (Assist) simultaneously
- Surge and reverse connection protections to support the lithium battery system perfectly
- Advanced SPWM technology and pure sine wave output
- PFC technology achieves a high power factor of AC to DC charging and reduces grid capacity usage
- Full digital double closed-loop control
- High tracking efficiency of MPPT no less than 99.5%
- Three charging modes: Solar only, Solar priority, Utility & Solar
- Two AC output modes: Utility priority and Inverter priority
- Self-learning SOC display function
- Multiple LED indicators to dynamic display the status
- AC OUT button to control the AC output directly
- 4.2 inches LCD to monitor and modify system parameters
- Remote temperature compensation for batteries
- Optional WiFi or GPRS Remote control by the RS485 isolated com. port
- Optional BMS-Link port, taking the charging and discharging control from BMS
- Customized charging current and discharging limited current
- Supports cold start and soft start
- Comprehensive electronic protection features
Technische Daten
Model | UP2000 HM6022 |
---|
EAN Code | 4260558573562 |
Item number | 60222000 |
Rated battery voltage | 24VDC |
Battery input voltage | 21,6 ~ 32VDC |
Max. battery charging current | 60A |
Inverter output | |
Continuous output power | 2000W |
Max. surge power(3S) | 4000W |
Output voltage range | 220VAC(-6% ~ +3%),230VAC(-10% ~ +3%) |
Output frequency | 50/60Hz ± 0,2% |
Output wave | Pure Sine Wave |
Load power factor | 0,2-1(Load power ≤ Continuous output power) |
Distortion THD | THD≤3%( Resistive load) |
Utility charging | |
Utility input voltage | 176VAC ~ 264VAC((Default) 90VAC ~ 280VAC(Programmable) |
Utility input frequency | 40 ~ 65Hz |
Max. utility charge current | 60A((When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 30A) |
Solar charging | |
Max. PV open circuit voltage | 450V① 395V② |
MPPT voltage range | 80 ~ 350V |
Max. PV input power | 2500W (Note: For the curve of Max. PV input power Vs. PV open-circuit voltage, see chapter 3.4 Operating mode for details.) |
Max. PV charging power | 1725W |
Max. PV charging current | 60A |
Equalize charging voltage | 29,2V(AGM Standard) |
Boost charging voltage | 28,8V(AGM Standard) |
Float charging voltage | 27,6V(AGM Standard) |
Low voltage disconnect voltage | 21,6(AGM Standard) |
Tracking efficiency | ≥99.5% |
Temp. compensate coefficient | -3mV/℃/2V(Standard) |
General | |
Surge current | 50A |
Zero load consumption | <1,8A (without PV and utility connection, turn on the load output) |
Standby current | <1,2A(without PV and utility connection, turn off the load output) |
Mechanical Parameters | |
Dimension(H x W x D) | 607,5×381,6x127mm |
Mounting size | 585*300mm |
Mounting hole size | Φ10mm |
Net Weight | 15kg |
Environment Parameters | |
Enclosure | IP30 |
Relative humidity | < 95% (N.C.) |
Environment temperature | -20℃ ~ 50℃ |
Storage temperature | -25℃ ~ 60℃ |
Altitude | <5000m ((If the altitude exceeds 1000 meters, the actual output power is reduced according to IEC62040.) |
① Atminimumoperatingenvironmenttemperature
② At25℃ environmenttemperature
*Values according to STC conditions (E=1000 W/sq.m, Tc=25 °C, AM=1,5)
There are no reviews yet.