EPEVER UPower-Hi Hybrid Inverter (Inverter / Charger) is the new generation of UPower Hybrid Inverter. supports diversified energy management modes on solar/utility/generator charging, and utility/inverter power supply to the AC loads. To maximize solar energy utilization, users can choose energy sources according to actual needs and flexibly take the utility as a supplement. This inverter charger can raise the system’s power supply guarantee rate, which is suitable for solar energy, utility/oil generator hybrid systems. It aims to provide users with high-quality, high-stability, and high-reliability electrical energy. Due to the improvement of protection functions against overcurrent and reverse polarity, the UPower-Hi inverter supports the lithium battery system.
Special features :
- Supports the battery mode or non-battery mode
- Surge current and reverse connection protections to support the lithium battery system perfectly
- High tracking efficiency of MPPT no less than 99.5%
- PFC technology which achieves a high power factor of AC to DC charging and reduces the usage of power grid capacity
- Advanced SPWM technology and pure sine wave output
- Three charging modes: Solar only, Solar priority, Utility & Solar
- Two AC output modes: Utility priority and Inverter priority
- Optional WiFi or GPRS Remote control via the RS485 isolated communication port
- BMS-Link port and optional BMS-Link communication protocol module
- Configurable battery charging current, discharging current and grid charging current
- AC OUT button to control the AC output directly
- Multiple LED indicators to dynamic display the status
- Supports cold start and soft start
- Comprehensive electronic protection features
- Battery types: AGM,GEL,FLD,LFP8/LFP15/LFP16,LNCM7/LNCM14
- 2 year product guarantee
Technical Specifications
Model | UP5000-HM8042 |
---|
Item number | 80425000 |
EAN Code | 4260558573500 |
Norminal battery voltage | 48VDC |
Battery input voltage | 43,2 ~ 64VDC |
Max. battery charging current | 80A |
Inverter output | |
Continuous output power | 5000W |
Max. surge power(3S) | 8000W |
Output voltage range | 220VAC(-6% ~ +3%),230VAC(-10% ~ +3%) |
Output frequency | 50/60Hz ± 0,2% |
Output wave | Pure Sine Wave |
Load power factor | 0,2-1(Load VA ≤ Continuous output power) |
Distortion THD | THD≤3%(Resistive load) |
Utility charging | |
Utility input voltage | 176VAC ~ 264VAC(Default) 90VAC ~ 280VAC(Programmable) |
Utility input frequency | 40 ~ 65Hz |
Max. utility charge current | 60A(When the Utility input voltage is 90VAC~180VAC,the Max. utility charge current is 30A) |
Solar Charging | |
Max. PV open circuit voltage | 500V① 440V② |
MPPT voltage range | 120 ~ 400V |
Max. PV input power | 4000W |
Max. PV charging power | 4000W |
Max. PV charging current | 80A |
Equalize charging voltage | 58,4V(AGM default) |
Boost charging voltage | 57,6V(AGM default) |
Float charging voltage | 55,2V(AGM default) |
Low voltage disconnect voltage | 43,2V(AGM default) |
Tracking efficiency | ≥99.5% |
Temp. compensate coefficient | -3mV/℃/2V(default) |
Gerneral | |
Surge current | 95A |
Zero load consumption | <1,2A (without PV and utility connection, turn on the load output) |
Standby current | <0,7A (without PV and utility connection, turn on the load output) |
Dimension (H x W x D) | 642,5 * 381,6 * 149mm |
Mounting size | 620 * 300mm |
Mounting hole size | Φ10mm |
Net Weight | 18kg |
Enclosure | IP30 |
Relative humidity | < 95% (N.C.) |
Arbeitstemperatur | -20℃ ~ 50℃ |
Storage temperature | -25℃ ~ 60℃ |
Altitude | <5000m (If the altitude exceeds 1000 meters, the actual output power is reduced according to IEC62040.) |
① At minimum operating environment temperature
② At 25℃ environment temperature
There are no reviews yet.